Samsung SCH-W259 Flashing Done With Z3x and Samsung PST

Samsung SCH-W259 Flash Done With Z3x and Samsung PST 

Here is the way how you can flash Samsung SCH-W259 Duos CDMA + GSM using Z3X and Samsung Phone Service Tool (PST) and the below is the procedure to Flash the phone.

Samsung W259 Flashing Problem Solved

Tools and Firmwares to Download for Samsung SCH-W259

SamsungPST_W259 For India

SamsungPST Setup

Samsung Firmware Binary W259DDDA2

Steps:

Flashing the GSM Part on Samsung W259

• Connect the Z3x box to the computer and see the COM port in Device Manager

• First install SamsungPST setup and Samsung PST_W259 For India.msi

• Then Run SamsungPST.exe (C:\Program Files\Samsung Electronics\SamsungPST)

• Click on the Model SCH-W259

• Go to SW Tab and choose software download option BIN+TFS(GSM)

• Select the GSM Flash file and Click on Start Software Download

• It will ask to select the COM Port Choose the Z3x COM Port and Click on OK

• One pop up will open just click OK

• Now connect the Phone to Z3x Box using RJ45 Cable an Press the Power Button(E210 Cable)

• The download process will start and takes about 30 minutes to complete

Note: Don't click on Rebuild.

Samsung SCH-W259 Flash done with Samsung PST and Z3x

Flashing the CDMA Part Samsung W259

• After complete the GSM Flash Close the Samsung PST and Open it again

• Then Select EMERGENCY(CDMA)

• Open the CDMA File W259DDDA2.bin 

• COM port setting should be the Modem COM Port (Setup-->Port Setting)

• Click on Start Software Download

• Now connect the USB Cable to the phone by pressing 9

Note: 

Use E210 USB Cable to flash CDMA Part

Use E210 UART Cable to flash GSM Part